DSE 7320 MK-II

Features:



Advanced AMF Controller

DSE 7320 MK II enables the advance automation option for local  / cloud network. facility for user. it is compatible over RS 485, RS 432, GSM, GPRS and can be used for Remote Monitoring Systems (RMS) / SCADA /  BMS ect. DSE Webnet  can make it possible to monitor & control DG Set remotely using software and app.

Categories: , ,
Brands:DSE

Enquiry about DSE 7320 MK-II

Description

In addition to all basic AMF features the DSE 7320 MKII  include USB, RS232 and RS485 ports as well as dedicated DSE Net® terminals for system expansion. PLC Editor can make the controller that can be configure the device to various control logic and advance automation requirement.

PRODUCT HIGHLIGHTS

I/O
– Configurable digital inputs (8)
– Configurable analogue / digital inputs (6)
– Configurable DC outputs (6)
– Independent fuel and start outputs
– Configurable volt-free outputs (2)

 

COMMUNICATIONS
– Simultaneous use of RS485 & RS232 ports
– MODBUS RTU
– USB for PC configuration
– SCADA software
– DSEWebNet® compatible

 

ENGINE COMPATIBILITY
– Conventional engine support (MPU & Hz)
– CAN engine support (Tier 4F / Stage 5)

 

CONFIGURATION
– DSE Configuration Suite PC software

 

ADVANCED FEATURES
– Mains (utility) supply monitoring
– Automatic transfer between mains (utility) & generator
– Supports 7 languages
– Crank disconnect on generator voltage
– Oil pressure disconnect delay
– Configurable icon screens
– CAN support for DSEA108 AVR
– Charge alternator disable functionality
– Dedicated inputs for ECU specific operations
– Advanced PLC editor
– SMS alerts & control
– Dual mutual standby

 

 

Protection Functions

  • Under / Over Speed (with CAN / MPU input only)
  • Low Oil Pressure
  • High Coolant (Water) Temperature
  • Low Fuel Level
  • Emergency Stop
  • Charger Alternator Fail
  • Low / High Battery Voltage
  • Mains Under / Over Voltage Protection (27/59)
  • Mains Under / Over Frequency Protection (81U/O)
  • Generator Under / Over Voltage Protection (27/59)
  • Generator Under / Over Frequency Protection (81U/O)
  • Generator Over Current Protection (50+51)
  • Generator Current Unbalance Protection (46)
  • Generator Earth Fault Protection (51N)
  • Generator Over Load Protection (KW)
  • Generator Reverse Power Protection (32)

Hardware

  • Dimension Details:

Over All Dimension – 245 mm x 184 mm x 51 mm
Panel Cut Out Dimension – 220 mm x 160 mm

  • DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
5 V for up to 1 minute

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
510 mA at 12 V, 240 mA at 24 V

MAXIMUM STANDBY CURRENT
330 mA at 12 V, 160 mA at 24 V

CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

  • GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
25 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
3.5 Hz to 75 Hz

  • MAGNETIC PICK UP

VOLTAGE RANGE
+/- 0.5 V to 70 V

FREQUENCY RANGE
10,000 Hz (max)

Variant

  • DSE 7320 MK II – Advanced AMF Controller
  • DSE 2520 – Extended Display Module
  • DSE 2130 – Input Expansion Module
  • DSE 2157 – Output Expansion module
  • DSE 2548  – LED Expansion  module
  • DSE 890 – DSE Webnet Gateway (4G / Ethernet)
  • DSE 892 – SNMP Gateway

Standards

Connection Diagram

Related products